View MPC7410PEPNS_5004628.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

preliminary?ubject to change without notice order number: MPC7410PEPNS/d rev. 0, 10 /2001 semiconductor products sector this document contains information on a new product under development by motorola. motorola reserves the right to change or discontinue this product without notice. ?motorola, inc., 2001. all rights reserved. motorola part numbers affected: xpc7410rx450pe xpc7410rx500pe xpc7410rx550pe mpc7410 part number speci?ation for the rx xxx pe series this document describes part-number-speci? changes to recommended operating conditions and revised electrical speci?ations, as applicable, from those described in the general mpc7410 hardware speci?ations (order # mpc7410ec/d). speci?ations provided in this document supersede those in the mpc7410 hardware speci?ations for the part numbers listed in table a only. speci?ations not addressed herein are unchanged. because this document is frequently updated, refer to http://www.motorola.com/sps or to your motorola sales of?e for the latest version. note that headings and table numbers in this document are not consecutively numbered. they are intended to correspond to the heading or table affected in the general hardware speci?ation. part numbers addressed in this document are listed in table a. for more detailed ordering information see table b.
2 mpc7410 part number speci?ation for the rxxxxpe series preliminary?ubject to change without notice features 1.2 features this section summarizes changes to the features of the mpc7410 described in the mpc7410 hardware speci?ations. 1.4.1 dc electrical characteristics table 3 provides the recommended operating conditions for the mpc7410 part numbers described herein. table a. part numbers addressed by this data sheet motorola part number operating conditions signi?ant differences from hardware speci?ation cpu frequency vdd t j (?) xpc7410rx450pe 450 mhz 2.0v?0mv 0 to 65 modi?d voltage and temperature speci?ation to achieve 450mhz frequency xpc7410rx500pe 500 mhz 2.0v?0mv 0 to 65 modi?d voltage and temperature speci?ation to achieve 500mhz frequency xpc7410rx550pe 550 mhz 2.0v?0mv 0 to 65 modi?d voltage and temperature speci?ation to achieve 550mhz frequency note: the x pre? in a motorola powerpc part number designates a ?ilot production prototype as de?ed by motorola sop 3-13. these are from a limited production volume of prototypes manufactured, tested and q.a. inspected on a quali?d technology to simulate normal production. these parts have only preliminary reliability and characterization data. before pilot production prototypes may be shipped, written authorization from the customer must be on ?e in the applicable sales of?e acknowledging the quali?ation status and the fact that product changes may still occur while shipping pilot production prototypes. table 3. recommended operating conditions characteristic symbol recommended value unit core supply voltage vdd 2.0v ?50mv v pll supply voltage avdd 2.0v ?50mv v l2 dll supply voltage l2avdd 2.0v ?50mv v processor bus supply voltage bvsel = 1 or bvsel = hreset ovdd 3.3 ?165mv bvsel = hreset ovdd 2.5v ?125mv v bvsel = gnd ovdd 1.8v ?90mv v l2 bus supply voltage l2vsel = hreset l2ovdd 2.5v ?125mv v l2vsel = gnd l2ovdd 1.8v ?90mv v
mpc7410 part number speci?ation for the rxxxxpe series 3 preliminary?ubject to change without notice features table 7 provides the power consumption of the mpc7410 part at the frequencies described herein. input voltage processor bus v in gnd to ovdd v l2 bus v in gnd to l2ovdd v jtag signals v in gnd to ovdd v die-junction temperature t j 0-65 ? note: these are the recommended and tested operating conditions. proper device operation outside of these conditions is not guaranteed. table 7. power consumption for mpc7410 processor (cpu) frequency processor (cpu) frequency processor (cpu) frequency unit notes 450mhz 500mhz 550mhz full-on mode typical maximum 5.9 6.5 7.1 w 1, 3 13.2 14.7 16.2 w 1, 2 doze mode maximum 4.5 5 5.5 w 1, 2 nap mode maximum 2.13 2.25 2.37 w 1, 2 sleep mode maximum 2.13 2.25 2.37 w 1, 2 sleep mode?ll and dll disabled typical 0.5 0.5 0.5 w 1, 3 maximum 2.0 2.0 2.0 w 1, 2 notes: 1. these values apply for all valid processor bus and l2 bus ratios. the values do not include i/o supply power (ovdd and l2ovdd) or pll/dll supply power (avdd and l2avdd). ovdd and l2ovdd power is system-dependent, but is typically <10% of vdd power. worst-case power consumption for avdd = 15 mw and l2avdd = 15 mw. 2. maximum power is measured at 65 ? and vdd = 2.0v while running an entirely cache-resident, contrived sequence of instructions which keep the execution units, including altivec, maximally busy. 3. typical power is an average value measured at 65 ? and vdd = 2.0v in a system while running typical benchmarks. table 3. recommended operating conditions (continued) characteristic symbol recommended value unit
4 mpc7410 part number speci?ation for the rxxxxpe series preliminary?ubject to change without notice features 1.4.2.1 clock ac speci?ations table 8 provides the additional clock ac timing speci?ations described in this document. refer to the mpc7410 hardware speci?ation for the remaining frequencies . table 8. clock ac timing specifications at recommended operating conditions (see table 3) characteristic symbol 450 mhz 500 mhz 550 mhz unit notes min max min max min max processor frequency f core 300 450 300 500 300 550 mhz vco frequency f vco 600 900 600 1000 600 1100 mhz sysclk frequency f sysclk 33 133 33 133 33 133 mhz 1 sysclk cycle time t sysclk 7.5 30 7.5 30 7.5 30 ns sysclk rise and fall time t kr 1.0 1.0 1.0 ns 2 t kf 0.5 0.5 0.5 ns 3 sysclk duty cycle measured at ovdd/2 t khkl /t sys clk 40 60 40 60 40 60 % 4 sysclk jitter ?50 ?50 ?50 ps 5 internal pll relock time 100 100 100 s6 note: see general hardware speci?ation.
mpc7410 part number speci?ation for the rxxxxpe series 5 preliminary?ubject to change without notice features 1.4.2.2 processor bus ac speci?ations table 9 provides processor bus ac timing speci?ations for the mpc7410 part described in this document . table 9. processor bus ac timing specifications at vdd=avdd=2.0v?0mv; 0 tj 65?, ovdd = 2.5v?.125v and ovdd = 1.8v?.090v, 60x bus at 133mhz parameter symbol 450, 500, 550 mhz unit notes min max mode select input setup to hreset t mvrh 8t sysclk 2,3,4,5 hreset to mode select input hold t mxrh 0 ns 2,3,5 setup times: address/transfer attribute transfer start (ts) data/data parity artry/shd0/shd1 all other inputs t avkh t tsvkh t dvkh t arvkh t ivkh 1.4 1.4 1.4 1.4 1.4 ns 10 6 7 8 input hold times: address/transfer attribute transfer start (ts) data/data parity artry/shd0/shd1 all other inputs t axkh t tsxkh t dxkh t arxkh t ixkh 0 0 0 0 0 ns 11 6 7 8 valid times: address/transfer attribute ts, abb, dbb data data parity artry/shd0/shd1 all other outputs t khav t khtsv t khdv t khdpv t kharv t khov 3.0 3.0 3.5 3.5 2.3 3.0 ns 12 6 7 7 9 output hold times: address/transfer attribute ts, abb, dbb data/data parity artry/shd0/shd1 all other outputs t khax t khtsx t khdx t kharx t khox 0.75 0.75 0.6 0.75 0.75 ns 13 6 7 9 sysclk to output enable t khoe 0.5 ns 14 sysclk to output high impedance (all except ts , abb/amon(0) , ar tr y /shd , dbb/dmon(0) t khoz 3.5 ns 15
6 mpc7410 part number speci?ation for the rxxxxpe series preliminary?ubject to change without notice features 1.4.2.3 l2 clock ac speci?ations table 10 provides l2clk output ac timing speci?ations for the mpc7410 part described in this document. sysclk to ts , abb/amon(0) , dbb/dmon(0) high impedance after precharge t khabpz 1.0 t sysclk 4,15, 16,17 maximum delay to ar tr y /shd0 /shd1 precharge t kharp ?t sysclk 4,17 sysclk to ar tr y /shd0 /shd1 high impedance after precharge t kharpz ?t sysclk 4,17 note: see general hardware speci?ation. table 10. l2clk output ac timing specifications at recommended operating conditions (see table 3) parameter symbol 450 mhz 500 mhz 550 mhz unit notes min max min max min max l2clk frequency f l2clk 150 225 150 250 150 275 mhz 1 l2clk cycle time t l2clk 4.4 6.67 4.0 6.67 3.64 6.67 ns l2clk duty cycle t chcl /t l2 clk 50 50 50 % 2 internal dll-relock time 640 640 640 l2clk 4 dll capture window ?00 ?00 ?00 ns 5 note: see general hardware speci?ation. table 9. processor bus ac timing specifications (continued) at vdd=avdd=2.0v?0mv; 0 tj 65?, ovdd = 2.5v?.125v and ovdd = 1.8v?.090v, 60x bus at 133mhz parameter symbol 450, 500, 550 mhz unit notes min max
mpc7410 part number speci?ation for the rxxxxpe series 7 preliminary?ubject to change without notice ordering information 1.4.2.4 l2 bus ac speci?ations table 11 provides the l2 bus interface ac timing speci?ations for the frequencies described in this document. 1.10 ordering information this section regards part numbers and markings. 1.10.1 part numbers addressed by this speci?ation table b provides ordering information for the mpc7410 part described in this document. table 11. l2 bus interface ac timing specifications at vdd=avdd=l2avdd= 2.05v?0mv; 0 tj 65?, l2ovdd = 2.5v?.125v and l2ovdd =1.8v?.090v parameter symbol 450, 500, 550 mhz unit notes min max l2sync_in rise and fall time t l2cr & t l2cf 1.0 ns 1 setup times: data and parity t dvl2ch 1.250 ns 2 input hold times: data and parity t dxl2ch 0.0 ns 2 valid times: all outputs when l2cr[14-15] = 00 all outputs when l2cr[14-15] = 01 all outputs when l2cr[14-15] = 10 all outputs when l2cr[14-15] = 11 t l2chov - - - - 2.25 2.50 2.75 3.25 ns 3,4 output hold times all outputs when l2cr[14-15] = 00 all outputs when l2cr[14-15] = 01 all outputs when l2cr[14-15] = 10 all outputs when l2cr[14-15] = 11 t l2chox 0.5 0.9 1.3 1.7 - - - - ns 3 l2sync_in to high impedance: all outputs when l2cr[14-15] = 00 all outputs when l2cr[14-15] = 01 all outputs when l2cr[14-15] = 10 all outputs when l2cr[14-15] = 11 t l2choz - - - - 2.0 2.5 3.0 3.5 ns note: see general hardware speci?ation
8 mpc7410 part number speci?ation for the rxxxxpe series preliminary?ubject to change without notice ordering information 1.10.2 part marking parts are marked as shown in figure a. figure a. motorola part marking for bga device table b. part-marking nomenclature xpc 7450 rx xxx x x product code part identi?r package processor frequency 1 application modi?r revision level xpc 2 7410 rx = cbga 450 500 550 p: 2.0 v ?50 mv 0 to 65?c e: 1.4; pvr = 800c 1104 notes: 1. processor core frequencies supported by parts addressed by this speci?ation only. parts addressed by other speci?ations may support other maximum core frequencies. 2. the x pre? in a motorola powerpc part number designates a ?ilot production prototype as de?ed by motorola sop 3-13. these are from a limited production volume of prototypes manufactured, tested, and q.a. inspected on a quali?d technology to simulate normal production. these parts have only preliminary reliability and characterization data. before pilot production prototypes may be shipped, written authorization from the customer must be on ?e in the applicable sales of?e acknowledging the quali?ation status and the fact that product changes may still occur while shipping pilot production prototypes. bga xpc7410 rx nnn pe mmmmmm atwlyywwa 7410 notes: nnn is the speed grade of the part mmmmmm is the 6-digit mask number atwlyywwa is the traceability code ccccc is the country of assembly (this space is left blank if parts are assembled in the united states)
mpc7410 part number speci?ation for the rxxxxpe series 9 preliminary?ubject to change without notice ordering information table c. document history revision number changes rev 0 initial release
10 mpc7410 part number speci?ation for the rxxxxpe series preliminary?ubject to change without notice ordering information
mpc7410 part number speci?ation for the rxxxxpe series 11 preliminary?ubject to change without notice ordering information
information in this document is provided solely to enable system and software implementers to use powerpc microprocessors. ther e are no express or implied copyright licenses granted hereunder to design or fabricate powerpc integrated circuits or integrated circuits based on the information in this document. motorola reserves the right to make changes without further notice to any products herein. motorola makes no warranty, represen tation or guarantee regarding the suitability of its products for any particular purpose, nor does motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. ?ypical?parameters which may be provided in motorola data sheets and/or specifications can and do vary in different applications and actual perfor mance may vary over time. all operating parameters, including ?ypicals?must be validated for each customer application by customer? technical ex perts. motorola does not convey any license under its patent rights nor the rights of others. motorola products are not designed, intended, or autho rized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, o r for any other application in which the failure of the motorola product could create a situation where personal injury or death may occur. should buyer pu rchase or use motorola products for any such unintended or unauthorized application, buyer shall indemnify and hold motorola and its officers, employe es, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising ou t of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that moto rola was negligent regarding the design or manufacture of the part. motorola and are registered trademarks of motorola, inc. motorola, inc. is an equal opportunity/affirmative action employer. how to reach us: usa/europe/locations not listed: motorola literature distribution; p.o. box 5405, denver, colorado 80217. 1-303-675-2140 or 1-800-441-2447 japan: motorola japan ltd.; sps, technical information center, 3-20-1, minami-azabu. minato-ku, tokyo 106-8573 japan. 81-3-3440 -3569 asia/pacific: motorola semiconductors h.k. ltd.; silicon harbour centre, 2 dai king street, tai po industrial estate, tai po, n .t., hong kong. 852-26668334 technical information center: 1-800-521-6274 home page: http://www.motorola.com/semiconductors document comments: fax (512) 933-2625, attn: risc applications engineering world wide web addresses : http://www.motorola.com/powerpc http://www.motorola.com/netcomm http://www.motorola.com/coldfire MPC7410PEPNS/d digitaldna is a trademark of motorola, inc. the powerpc name, the powerpc logotype, and powerpc 603e are trademarks of international business machines corporation used by motorola under license from international business machines corporation.

▲Up To Search▲

Price & Availability of MPC7410PEPNS

	To Download MPC7410PEPNS Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .